The aesthetic and safety issues of the elevator car interior design process are often overlooked. In the relevant information for many years, the elevator decoration caused the weight of the car to change, resulting in a balance factor that did not meet the requirements, resulting in a lot of accidents in the elevator.
After the decoration of the elevator car, the specific gravity is about 320kg according to the weight of the 1 ton car. After the decoration, the weight exceeds 380kg. In order to make the elevator return to the base point (that is, the original balance coefficient), the weight must be increased by 190kg at the same time, that is, the total weight of the traction machine is 570kg. Of course, the elevator design has a certain amount of overweight reserved data. However, exceeding the number will cause different degrees of metal fatigue in the main engine, gears, main shafts, and various steel ropes and cable rafts. Because of this kind of consequences, any test tool can't work. If the speed of the cable boring is deepened, it can only be judged by experience. The elevator itself is overweight, so that the elevator can be easily buffered without one second, which may cause various accidents in the elevator, especially the high-speed ladder and the inorganic room ladder. Therefore, in the decoration design, it is necessary to control a certain decoration weight.
Every year, there are various accidents caused by overweight elevators in the world, but many elevator decoration providers have not really paid attention to this problem. In the elevator decoration design, try not to use too much heavy material. The design and implementation of elevator decoration should choose professional and experienced institutions.
![电梯轿厢装潢施工 电梯轿厢装潢施工](/data/upload/image/20190115/1547514972135226.jpg)