Elevator car decoration company explains how to use the elevator

1. The elevator is provided with a landing door, a car running direction indicator, a math display car, a running position fingering device and a summoning elevator button at each service level station. When the elevator call button is used, press the up button on the upper floor and the direction button on the downstairs.

2. When the car arrives, the direction indication of the floor shows the direction of movement of the car. The passenger judges the direction and determines that the elevator is normal and then enters the car. Pay attention to the closing of the door leaf. Do not stay at the junction of the door and the car door.

Third, the car has a position display, control panel and switch door button and floor selection button. After entering the car, press the selection button to go to the floor. To close the car door immediately, press the close button. The car floor location indicator light shows the arrival floor and leaves the car door open.

4. The rated load of the elevator is 13 people. It cannot be overloaded. Please take the initiative to withdraw when the personnel are overloaded.

5. Passenger elevators cannot be used frequently as cargo elevators. It is absolutely not allowed to ship flammable or explosive products.

6. When an abnormal phenomenon or malfunction occurs in the elevator, it should be kept calm. You can call the rescue call in the car. You must not slam the door without authorization to escape the car.

7. Passengers are not allowed to rely on the car door. It is not allowed to smoke and litter in the car to keep the car clean and hygienic.

8. Passengers should take care of the elevator facilities, and do not accidentally press buttons and smash the door.

IX. The driver must strictly perform the duties of the post. During the operation of the elevator, it is not allowed to stay away from the post and find faults to be processed and reported in time.

X. The driver is not allowed to use the maintenance and emergency stop button as the normal elimination call signal before starting; the maintenance speed is not allowed to be used in the case of the floor and the car door; the car top trap door and the safety door are not allowed to be opened. It is not allowed to use the inspection speed to ship long-length objects; it is not allowed to use the start or stop function of the manual car door as the starting or stopping function of the elevator; it is not allowed to suddenly change direction during the exercise.

XI. The driver should check the elevator operation frequently, contact the elevator for maintenance and maintenance, and make a maintenance record.

12. When the elevator is stopped, the driver should stop the car at the base station and disconnect all the switches on the operating panel to close the door. In case of power failure notice, stop the elevator in advance.