What should be noted about the cleaning of elevator parts cylinders?

Lifting freight elevators, as transport equipment for straight lifting of goods, are now widely used in various social days. The construction is more and more extensive. Whether it is construction or civil engineering, equipment and repairs are still inseparable from the use of freight elevators in daily life. .

The hydraulic system is an important part of the elevator freight elevator machinery. When the hydraulic oil enters the hydraulic system, cleaning is the primary problem. Dirt and other impurities should be prevented from entering the system. As you already know, tiny particles can scratch the valve, get stuck in the pump, block the orifice, and then create a patch that is costly.

Maintaining the hydraulic system is the key to the safe use and long-term use of the elevator freight elevator machinery. How to correctly grasp the maintenance method of the hydraulic system? How to keep the hydraulic system clean?

First, hydraulic lift freight elevator should adhere to hydraulic oil cleaning

Store the oil in a clean orientation and be careful when changing oil or refueling. Only use a cleaning funnel equipped with a fine mesh filter to pour oil from the container into the tank. Of course, the oil you use should be the type recommended by the equipment manufacturer.

Second, the freight elevator should adhere to the system cleaning

Timely replace oil and filter. Good hydraulic fluids contain a variety of additives that prevent oil from enthalpy or block system parts. However, these additives lose their efficacy over time. Therefore, the oil should be replaced regularly to ensure that the additive works. The filter can only absorb a limited amount of dirt particles and other impurities from the oil. Replace the filter at the claimed cycle to keep the system clean.

Third, the freight elevator should be regularly drained and refilled.

When the water and sediment in the tank are released, it is important to remove the impurities in the oil, but it is also important to vent the entire hydraulic system at regular intervals. This is the only sure way to completely remove system impurities, oxidized hydraulic fluids and other harmful substances. The recommended clean hydraulic fluid should then be reintroduced into the system.

If the hydraulic oil of the rail lift freight elevator is completely contaminated, especially when the pump is damaged, it is necessary to clean the oil in the fuel tank. The oil is moved by the oil cleaning device until the oil is inserted into the hand indicating that the oil is in a satisfactory condition.